Description
Lengths: 10', 11', 12'
Standard Features
7″ x 9.8 lb. structural channel long sills.
4″ structural channel cross members, 12″ o.C.
7 ga. steel floor formed with inner side wall.
7 ga. box formed top rail and V-formed outside wall w/10 ga. vertical braces
18″ cab shield with side boards brackets. Various heights available
Front and rear posts are 10″ higher than sides with side board brackets.
LED light kit consisting of S/T/T lights, 1-per side, marker & clearance lights w/rubber grommets & wiring harness.
Sand blasted and painted with 2 coats of Imron® 3.1 HG-D + Polyurethane High Gloss DTM
Tailgate
7 ga. formed tailgate w/trapezoid top/bottom rail, (3) 10 ga. horizontal and (4) 10 ga. vertical braces.
Standard height is 10″ higher than sides.
Top pivot is a bolt-in style pin.
Bottom has dump latch with release lever at front driver’s side.
Standard with spreader chains and banjo eye chain holders on rear posts.
Sand blasted and painted with 2 coats of Imron® 3.1 HG-DT + Polyurethane High Gloss DTM
Available Options
36″ or 48″ Cab Shield, w/ D-rings, 1 per corner
Metering Chute Spreader Apron
Tailgate gate latch – Air cylinder
Dump Hoists – electric or PO
Custom sizesSpecifications
Year2026
ManufacturerLARAMIE
ModelDB7000
ConditionNew
ColorBlack
CompositionSteel
DoorsSwing
Dump LocationRear
Length11 ft
Height30 ft
Width96 in
Year2026|
ManufacturerLARAMIE|
ModelDB7000|
ConditionNew|
ColorBlack|
CompositionSteel|
DoorsSwing|
Dump LocationRear|
Length11 ft|
Height30 ft|
Width96 in|
